How to fix HP Printer Error 59?

HP Printer Error 59 is an error which can be seen causing with HP Printer at a certain period of time. When this error appears, it just stops the work happening in between. HP Printer Error 59 can be fixed. You can contact HP Printer Tech Support team for any kind of assistance to solve technical queries.

Working on computer and laptop is fun as it makes out our work go easy and smooth. The tasks we do in the systems are completed as the printer prints out the required files and documents we need for various kinds of purposes.

Procedure to Fix HP Printer Error 59

1.    Begin the process by reseating the IBT.

2.    Now check the connection of primary transfer disengagement (Sensor SRg at connector J19) to the DC controller PCA (connector J128).

3.    Now remove the ITB from the unit and test the ITB gear and flag manually.

4.    Rotate the gear and check the flag to operate when the white gear turns on.

5.    If the ITB flag is broken, damaged or doesn’t move than replace it.

6.    Now check the Manual Sensor Test if the ITB gear and flag is not working.

7.    If the ITB is re-installed then remove it and locate the Sensor SRg into the ITB cavity.

8.    Press the Home button from the Control Panel.

9.    Now press the down arrow for highlighting the DIAGNOSTICS.

 Once the ITB gear and flag starts working properly test the Sensor SRg with the help of Manual Sensor Test and test the Sensor SRg flag manually.

1.    Remove the re-installed ITB and locate the Sensor SRg into the ITB cavity.

2.    Press the Home button from the Control Panel.

3.    Now press the down arrow for highlighting the DIAGNOSTICS.

4.     Press and release the flag and check the control panel display sensor response and confirm the sensor toggle between 0 and 1.

5.    Replace the sensor WG8-5696 –oooCN, if the sensor toggle is not between 0 and 1.

 Once the Sensor SRg starts working properly, perform a fuser motor by removing the fuser.

1. Now defeat the right door safety switch by inserting a stiff or folded piece of paper through masking tape to hold the switch down.

      2. Press the Home button, press the down arrow for highlighting the DIAGNOSTICS

      3. Press the OK button.

      4. Select the Component Test and press on OK.

      5. Select Fuser Motor and press OK.

6.    Checks for the Fuser Motor, if it fails then replace it.

Once the Fuser Motor starts working, bring out one more test of ITB Contact/ Alienation Test.

1.    Defeat the right door safety switch by inserting a stiff or folded piece of paper takes out the right door switch logic switch by using masking tape to hold the switch down.

2.    Press the Home button, press the down arrow for highlighting the DIAGNOSTICS

3.    Press the OK button.

4.    Select the Component Test and press on OK.

5.    Select and press OK.

6.    Select Contact/ Alienation test and press OK.

7.    In the end, check the connections again to the primary transfer disengagement sensor J19 and to the connector J128 on the DC controller PCA before reinstalling ITB. If the error still remains then the DC controller needs to be replaced.

HP Printer Tech Support

HP Printer provides assistance to the customers around the clock where the customers can solve out their technical related queries of the HP product. To avail assistance, you can call on to toll-free number +1-888-621-0339 at any point of time and have a conversion with the technical support team. The technical support team never charges its customers for any hidden charges. You can enjoy the service at a low cost by subscribing onto the monthly or yearly package provided by the HP Printer Tech Support.

How to fix HP Printer error code 0005fbb6?

If you are facing an HP Printer Error Code 0005fbb6, then it means that there is some issue related to the HP printer ink System, & because of this issue the Hp printer is unable to print or scan, therefore, carefully check the solution provided here below to get relief from the HP printer error code.

The users of HP who are getting frustrated from the HP Printer Error Code 0005fbb6, for all of them, we have here enlisted some HP printer troubleshooting steps to get rid of the error. So, all clients are recommended to follow the HP printer troubleshooting steps and get relief from the printer issue.

Devices like Printers make our work very easy & it is quite simple to use the printers these days because of the latest innovation & technologies that make printers much more efficient and easy to use. Well to Fix HP Printer Fuser Error Code 50.4. Processing Job, a well-explained solution steps has been penned down by a team of HP Printer Support technicians –

  • First of all, uninstall device drivers.
  • Now, disconnect the USB cord from your printer device.
  • After this, download the drivers.
  • Now carefully, install the printer drivers properly.
  • After doing this, the clients are suggested to re-connect the USB cable once again.
  • Now turn it on your PC to recognize the printer and try to print something.
  • User can also re-set your printer device.
  • Now disconnect your USB without turning the device.
  • Once you disconnect your USB without turning the device, after this carefully remove the ink cartridge from your product.
  • Now wait for 20 to 30 seconds.
  • Also, carefully disconnect the power cords from your main printer.
  • Now again wait about 70 to 80 seconds once the printer device turned off.
  • Once again carefully re-connect the all printer power cables to your main device.
  • If by re-connecting the power cables printer device is switched on.
  • So, simply push the power button to turn it on your device.
  • Now be careful while putting the ink cartridges.
  • Once done, close the printer access door.
  • Now make sure before you insert the cartridge, please check is the cartridge is clean or not.
  • Now once again Re-connect the USB cable to the device.
  • User can also try factory settings as well.
  • Just go to the properties and push tool option and select restore factory.
  • Then turn off your printer and wait for few seconds.
  • After Few Seconds You can turn on your HP Printer.
  • Now try to do some prints.

We hope that after trying all these Hp printer troubleshooting steps. It would be easy for all of you to resolve the HP Printer Error Code 0005fbb6, and hence, if after trying these steps, you didn’t get a positive response then, without wasting your time, ask for assistance from the experts of HP, as they are available round the clock to provide support to all troubled clients. Click here for more information.